What Are Roller Mills and Flakers and How Do They Work?
A roller mill consists of one or more pairs of rolls turning in opposite directions. Kernels are fed by a feed roll into the gap between the two rolls and, depending on that gap and the roll surface, are cracked, ground or flattened. Because the force on the kernel is pressure and shear rather than impact, the product is more uniform and fewer fines are produced.
In the flaking process, grain first spends time in a vertical vessel called a steam chest, where steam makes it hot, moist and soft. It then passes between two large, heavy rolls pressed together under high force and is flattened into thin flakes. The hot, moist flakes are then cooled and dried in a cooler or dryer so they can be stored.
Main components:
- Pairs of rolls: smooth for flaking, corrugated for cracking
- Gap and pressure adjustment: manual, pneumatic or hydraulic
- Feed roll: to spread the grain evenly along the rolls
- Steam chest: in flaking lines, to heat and soften the grain
- Motor and power transmission: belt or gearbox drive
Features
- Two or more pairs of smooth or corrugated rolls
- Precise roll gap adjustment
- Uniform particles with few fines
- Lower energy use than a hammer mill for coarse grinding
- Can be designed with a steam chest for flaking
- Even feeding along the length of the rolls
- Durable rolls that can be re-corrugated
Applications
- Producing steam-flaked corn and barley
- Coarse cracking of grain for livestock feed
- Rolling barley and corn
- Preparing grain for calf and feedlot rations
- Livestock feed mills and large dairy and beef farms
Where Roller Mills and Flakers Fit in a Feed Mill
Grain comes from the silo and passes through the screener before entering the line. In a flaking line, the grain first takes up steam in the steam chest, is then flattened in the flaker, and the hot flakes are cooled and dried in a cooler or dryer before going to the product silo or mixer. A dry roller mill can also prepare grain for the mixer instead of, or alongside, the hammer mill.
How to Choose Roller Mills and Flakers
Before ordering, define the following to choose the right model:
- Type of product: Dry cracking, rolling or steam flaking; each needs different rolls, pressure and auxiliary equipment.
- Capacity: Roll length and diameter are calculated from tonnes per hour and the type of grain; a flaker needs larger, heavier rolls.
- Flake thickness or particle size: The accuracy and stability of the roll gap setting determine product quality.
- Steam system: For flaking, the boiler capacity and steam chest size must match the flaker capacity.
- Cooling and drying: Hot, moist flakes must be cooled and dried before storage; do not leave this out of the line design.
What Affects the Price of Roller Mills and Flakers
The price of roller mills and flakers is not a fixed figure; it depends on the specification of your order. The main factors are:
- Capacity and roll size
- Number of roll pairs
- Roll material, hardness and surface pattern
- Type of gap and pressure adjustment (manual, pneumatic or hydraulic)
- Steam chest and steam equipment
- Cooler or dryer and conveying equipment supplied with it
For an accurate quote, send us the capacity you need, the type of materials and the conditions of your production line, and we will prepare a technical and commercial proposal for your project.
Roller Mill and Flaker Maintenance and Service
- Check the roll surfaces for wear and re-corrugate or regrind them when needed.
- Regularly check that the rolls are parallel and the gap is the same at both ends.
- Grease the bearings on schedule and check their temperature.
- In flaking lines, inspect the steam chest nozzles and steam traps.
- Make sure the inlet is free of stones and metal before grain enters.
Why Choose Dor Gostar Sahel Roller Mills and Flakers?
We design roller mills and flakers together with the steaming and cooling sections as one complete system, so that flakes of uniform thickness and quality are produced. Dor Gostar Sahel builds these machines to order, matched to your grain and capacity, from very low capacities for farms to unusually high ones for feed mills. Manufacturing, installation and commissioning are carried out by our team.
Frequently Asked Questions
What is the difference between a roller mill and a hammer mill?
A hammer mill breaks material by impact and suits fine grinding; a roller mill works by the pressure and shear of the rolls and produces coarser, more uniform particles with fewer fines.
What are the benefits of flaked corn?
Steaming and flattening the kernel partly gelatinises the starch, which raises its digestibility and energy value for cattle, especially dairy and beef cattle.
Can a flaker work without steam?
Without steam the machine only cracks or rolls the grain (dry rolling); steaming before the rolls is needed to produce true flakes of good quality.
FA