What Are Control Panels and PLC Automation Systems and How Do They Work?
The electrical and control system of a feed mill has three layers. The first is the power panels and motor control centres (MCC), which supply dozens of motors and start, control and protect them with contactors, overload relays, soft starters and variable frequency drives. The second is the PLC, which reads the sensor signals and starts and stops the machines according to its program.
The third layer is the display and control system in the control room (HMI or SCADA), which shows an overview of the line, the status of each machine, alarms and reports. One of the system's most important jobs is interlocking: machines start in order from the end of the line back to the start, and if one stops, the machines before it stop too, so material does not pile up and conveyors do not choke.
Main components:
- Power panels and MCC: with contactors, motor protection, soft starters and variable frequency drives
- PLC and I/O modules: to run the control logic and interlocks
- HMI or SCADA: for monitoring and control from the control room
- Sensors and instrumentation: level, speed, temperature, pressure and load cells
- Cabling and cable trays: to the plant's electrical drawings
Features
- Power panels and motor control centres (MCC)
- PLC logic control with safety interlocks
- Operator screens (HMI) with a full line overview in the control room
- Soft starting of motors with soft starters and variable frequency drives
- Batching software with formula storage and production reports
- Connection of level, speed, temperature and weight sensors
- Can be installed in stages on existing lines
Applications
- Full automation of a feed mill
- Control of batching and weighing
- Conditioner temperature and pellet mill load control
- Dryer and cooler control
- Upgrading panels and controls of older lines
- Control panels for single machines
Where Control Panels and PLC Automation Systems Fit in a Feed Mill
The control system covers every part of the plant: from receiving and the silos, the hammer mill and the batching system to the mixer, the conditioner and pellet mill, the cooler, the dryer and packing. In smaller lines, a stand-alone control panel can control just one machine or one section of the line.
How to Choose Control Panels and PLC Automation Systems
Before ordering, define the following to choose the right model:
- Project scope: Automating the whole plant, one section (such as batching or pelleting) or a single machine; each has a different design and cost.
- Number and power of motors: The list of motors and their ratings is the basis of the power panel design.
- Level of automation: From semi-automatic control with push buttons and lamps to a fully automatic system with batching software, production reports and a link to the office network.
- New or existing line: On existing lines, a site survey and a staged installation plan keep production downtime to a minimum.
- Support and spare parts: Choose equipment brands whose spare parts and support are readily available.
What Affects the Price of Control Panels and PLC Automation Systems
The price of control panels and plc automation systems is not a fixed figure; it depends on the specification of your order. The main factors are:
- Project scope and number of machines
- Number and power of motors
- Number of variable frequency drives and soft starters
- Type and brand of PLC, HMI and electrical components
- Number of sensors and instruments
- Batching and reporting software, and the amount of cabling
For an accurate quote, send us the capacity you need, the type of materials and the conditions of your production line, and we will prepare a technical and commercial proposal for your project.
Control Panel and PLC Maintenance and Service
- Keep panels clean and their doors closed; feed dust on electrical components is a fire and failure risk.
- Periodically re-tighten connections and terminals and check them with a thermal camera.
- Clean the panel ventilation fans and filters regularly.
- Keep backup copies of the PLC program and drive settings.
- Test the sensors and emergency stop buttons regularly.
Why Choose Dor Gostar Sahel Control Panels and PLC Automation Systems?
Automation and control systems are one of Dor Gostar Sahel's core services, and because we build the line machinery ourselves, we design the control logic around the real behaviour of each machine. We design and build panels and control systems to order, from a small panel for a single machine to full automation of plants with unusually high capacities. Upgrading the controls of existing lines is also part of our work.
Frequently Asked Questions
Can an older line be automated?
Yes; after a site visit and review of the existing equipment, new panels and controls are designed, and installation can be carried out step by step with minimal production downtime.
How are the PLC and electrical component brands chosen?
Based on the project needs, budget, availability of spare parts and local support, and, if the client prefers, the brand of their choice.
Can production and material consumption reports be produced?
Yes; the control software can record batch data, raw material consumption and machine running hours and present them as reports.
FA