What Is an Intake Pit and How Does It Work?
An intake pit is a large hopper built below ground level in the floor of the receiving building or yard and covered with steel grating. The truck stands on or beside the grating and unloads; material passes through the grating openings and collects in the hopper, while the grating keeps large objects out of the line.
At the bottom of the hopper, a gate and conveyor (usually a drag chain or screw conveyor) draw material out of the pit at a controlled rate. The hopper walls must be steep enough for material to slide completely to the outlet without staying in the corners. An aspiration hood above the pit collects the dust raised by unloading.
Main components:
- Grating: heavy-duty steel grid over the pit opening
- Steel hopper: with a slope suited to full material flow
- Outlet gate: to control the flow to the conveyor
- Under-pit conveyor: drag chain or screw conveyor
- Aspiration hood (optional) connected to the dust collection system
Features
- Heavy-duty grating for trucks to drive over or stand beside
- Steel hopper with the right slope for complete discharge
- Flow control gate at the pit outlet
- Matched to the drag chain or screw conveyor below
- Optional aspiration hood and dust collection
- Designed for rear or side truck unloading
- Optional magnet on the outlet
Applications
- Receiving grain such as corn, wheat and barley
- Unloading meals and bulk raw materials
- Feeding the receiving line and storage silos
- Receiving materials in livestock, poultry and aquatic feed mills
- Receiving materials in concentrate plants
Where the Intake Pit Fits in a Feed Mill
The intake pit is the first section of the mill. After unloading, material is carried by a drag chain conveyor or screw conveyor to the bucket elevator, cleaned in the pre-cleaner and then stored in the storage silos. The air from the pit's aspiration hood goes to an bag filter.
How to Choose an Intake Pit
Before ordering, define the following to choose the right model:
- Type and size of loads: The type of trucks, the volume of each load and the number of trucks per day set the pit dimensions.
- Receiving capacity: The capacity of the under-pit conveyor and elevator must match the target unloading speed so trucks are not kept waiting.
- Type of material: Grain flows easily; meals and powders need steeper hopper slopes and sometimes discharge aids.
- Location and traffic: The truck route and rear or side unloading affect the pit layout.
- Dust control and safety: Plan the aspiration hood, safety railings and grating strong enough for the truck weight from the start.
What Affects the Price of an Intake Pit
The price of an intake pit is not a fixed figure; it depends on the specification of your order. The main factors are:
- Hopper size and volume
- Grating strength and type
- Hopper plate thickness
- Type and capacity of the under-pit conveyor
- Aspiration hood and connection to dust collection
- Gates and discharge aids
For an accurate quote, send us the capacity you need, the type of materials and the conditions of your production line, and we will prepare a technical and commercial proposal for your project.
Intake Pit Maintenance and Service
- Inspect the grating regularly for bending and damage.
- Remove foreign objects collected on the grating after each unloading.
- Check the inside of the hopper for stuck or mouldy material and clean it.
- Service the under-pit conveyor and outlet gate on schedule.
- Keep rainwater and moisture out of the pit.
Why Choose a Dor Gostar Sahel Intake Pit?
We design the intake pit together with the conveyor, elevator and screener of the receiving section as one system, so trucks unload quickly and the receiving line is never a bottleneck. Dor Gostar Sahel designs and builds intake pits to order, matched to your trucks, materials and capacity, from very low capacities to unusually high ones. The experience of building dozens of complete feed lines stands behind the design.
Frequently Asked Questions
How is the intake pit capacity determined?
From the load volume of each truck, the target unloading time and the capacity of the conveyor under the pit.
Does an intake pit need dust collection?
Yes; unloading produces a lot of dust, and an aspiration hood connected to a bag filter keeps the working area cleaner and healthier.
Do you build the concrete structure of the pit too?
We design the steel equipment and provide the dimensional drawing of the pit; the concrete work is usually carried out from that drawing by the project's civil contractor.
FA